Turning The Button Sound On Or Off; Adjusting The Button Beep Volume - SciCan HYDRIM M2 G4 Mode D'emploi

5. Instructions for Use (cont.)
5.14 Adjusting the temperature display
1.
2.
Scroll to
3.
Use
Fahrenheit. Press

5.15 Turning the button sound ON or OFF

The HYDRIM is preset to beep when a button is pressed. If you would like to turn the button
sound off, follow these steps:
NOTE: Turning OFF the button sound does NOT turn off other alarms and cycle notification
beeps.
1.
2.
Scroll to
3.
Use
Press

5.16 Adjusting the button beep volume

If you would like to adjust the beep volume, follow these steps:
1.
2.
Scroll to
3.
Use
pressing it. Press
Temperature C/F and select.
to choose between having information displayed in degrees Celsius or
to save and return to the Setup menu.
Beep ON/OFF
and select.
to scroll through your ON or OFF options and select it by pressing it.
to save and move back to the Setup menu.
Beep Volume and select.
to scroll through the volume settings. Select the one you want by
to save and move back to the Setup menu.
21