Assembly Instructions T300 - Christopeit Sport TRAMPOLIN T300 Notice De Montage Et D'utilisation

ASSEMBLY INSTRUCTIONS T300

Remove all the separate parts from the packaging, lay them on the
floor and check roughly that all are there on the base of the assembly
steps. For assembly you need approx. 10 min. time and enough empty
area.
Final assembly of trampoline.
1. Pull apart the folded trampoline, so that a semicircle is create.
2. Then fold the two halves apart so far, until the trampoline is com-
pletely unfolded.
3. Pull the enclosed surrounding cover (7) over the frame. Make sure
that the threats of frame on bottom side put through the punched
holes in the surrounding cover.
4. Screw the foot tubes (3) onto the threats of frame as far as they will
go on and place the trampoline on the foot tubes. It is possible that
not all of the foot tubes will stand on the floor immediately after as-
sembly. The foot tubes then align themselves for a safe stable stand
when the trampoline is in use.
Checks
1. Check the correct installation and function of all screwed and plug
connections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the trampoline
and start with light exercise.
Note:
Please keep the tool set and the instructions in a safe place as these
may be required for repairs or spare parts orders becoming necessary
later.
1
2
3
4
11
GB