Burg Wächter TRSE 6000 FS Manuel D'utilisation page 20

Attention: When saving a fingerprint it is important that the finger is laid
evenly and in a straight position over the sensor. Follow the instructions
on the display. The finger is saved only when it can be read in an optimum
quality.
6. Opening with fingerprint*
– Press the On / Enter key
– The indication of Code / Fingerp is displayed
– Move the saved finger over the sensor
– Value not achieved is displayed for a short time
– The Code / Fingerp indication is displayed
– At this point, enter an additional opening code.
– The instruction Please turn knob is displayed
7. Deleting a finger*
– Press the On / Enter key
– The indication of Code / Fingerp is displayed
– Press the Function key
– The Change code menu is displayed
– By pressing the key 2 reach the Administrator menu
– Press the On / Enter key
– Admin setup Create user is displayed
– By pressing the key 2 reach the Admin. setup Delete menu
– Press the On / Enter key
– Delete user is displayed
– Press the On / Enter key
– At this point you are asked to enter the admin.
Code (factory setting 123456)
– Now you have to select the appropriate user by pressing the keys 1 or 2
– Press the On / Enter key
– The indication of Delete data to be confirmed with the On key
is displayed.
– Press the On / Enter key
– The indication of Data record deleted is displayed
Additional users can be deleted using the On / Enter key. By pressing the
Function key, you can reach higher menu levels up to the code entry.
20 | English TRSE 6000
2
Th
sav
Er
too
ple
too
ple
too
ple
pla
an