Burg Wächter TRSE 6000 FS Manuel D'utilisation page 13

Blocking times: To protect the lock against manipulation the electronics
block the access to the safe for 5 minutes if 3 incorrect pincodes have
been entered one after another. With every following wrong pincode
for 10 minutes. During this period, the display shows the remaining
countdown time. Opening the safe is also not possible with a valid user
or administrator code.
In order to enhance the protection against intrusion,
the following points should be observed:
For locking systems with material code carriers, e. g. an E-Key:
– The code carrier should be consistently stored safely, so that it is accessible
only to the authorized persons.
– In case of a loss of the code carrier, the lock should be immediately
replaced or converted to a new combination by changing the coding,
and / or the code of the lost code carrier should be blocked / deleted.
For locking systems requiring a code:
– No personal data (e. g. dates of birth) or other data, for which a link can
be derived to the code owner, should be used for coding.
– If the code is stored in writing, such document should be consistently
stored safely, so that it is accessible only to the authorized persons.
– Attention: Any changes of the administrator code and of the user codes
shall be made with the safe door opened!
– When the locking system has been reset to another code, this new code
should be repeatedly used with the safe door opened.
2.1 Description of basic functions
You can program your lock based on the following description.
You can see the programming instructions on the display. To program the
lock (enter into the menu), please press the "Function" key, when the
symbol "M" is displayed. You can move within the menu using the keys "1"
scroll up (symbol on display) and "2" scroll down (symbol on display). When
the symbol "<" is displayed, you can use the "Function" key to skip to the
next higher menu level, and choose a particular menu item using the "Enter /
On" key. The battery symbol indicates the current battery status:
Battery full
[ ] [ ] [ ] Battery empty (please replace the batteries)
The batteries are replaced in a way depending on the safe fittings.
Battery replacement page 42
TRSE 6000 English | 13