Burg Wächter TRSE 6000 FS Manuel D'utilisation page 12

2 Generally
Thank you for deciding for a safe with the BURG-WÄCHTER TRSE 6000
electronics. This electronics is VdS-certified for class B. You have acquired
a product meeting extremely high security requirements and developed
and manufactured using the latest technical potential.
Please read the entire User Manual before programming and store it at a
safe place for future reference.
The TRSE 6000 electronics is available in a TRSE 6000 FP version with a
fingerscan unit and in another version TRSE 6000 without the fingerscan
unit. The present user manual applies to both versions, however, the menu
structure is able to detect automatically the appropriate version and thus
only the menu items intended for it are active. The items relevant only for
the electronics with a fingerscan unit are marked with*.
Generally, you can open the safe in three possible ways:
– with a code
– with an E-Key (ident medium TSE 5103 E-Key SB and TSE 6103 E-Key
not included in the delivery)
– with your fingerprint*
The administrator code when delivered from the factory is 123456. This
code must be changed. Additional 9 users with a code to be entered by
the keyboard can be defined. Such code has always six digits, similarly to
administrator's code.
Additionally, up to 300 E-Keys for contactless opening can be stored.
In case you posses a safe with a fingerscan unit, up to 10 users with
fingerscan can be additionally stored. Users with fingerscan are identified
in the user list of the lock as USER xxx_FP.
The TRSE 6000 FP electronics is the first safe electronics, for which the
opening based on fingerscan is certified.
At least two opening codes shall be entered to open the safe using
fingerprint. Another opening code must be entered in addition to fingerscan.
This can be either another fingerscan, but also a pin code or an E-Key.
All the fingerscans are stored in the system with a value of ½. In order to
acquire the authorization to open, a value of at least 1 must be achieved.
A pin code with a value of at least ½ must be therefore entered for the
opening, a value of 1 can be also achieved with an additional fingerscan.
Attention: The values can only be adjusted using TSE Light, TSE System and
System + software. When a PIN code user or an E-Key user is being created
for the safe, an inquiry is made on whether the opening code shall be used
together with a fingerprint. Correspondingly, the value is then automatically
set to ½. Otherwise the PIN code and the E-Key are assigned values of 1,
the fingerscan is always assigned a value of ½.
12 | English TRSE 6000
Blo
blo
be
for
co
or
In
th
Fo
–
–
Fo
–
–
–
–
2
Yo
Yo
loc
sym
scr
the
ne
On
[ ] [
Th
Ba