Burg Wächter TRSE 6000 FS Manuel D'utilisation page 18

2.4 Detailed description of selected basic functions
1. Opening the safe using the factory code
– Press the On / Enter key
– The Code / Fingerp indication is displayed (in case you possess electronics
without fingerscan, Code is displayed instead.)
– At this point you are asked to enter the Admin.
Code (factory setting 123456)
– The instruction Please turn knob is displayed
Attention: The message Please turn knob implies the action with the knob
of the locking unit, for which the opening code has been entered.
2. Changing the Administrator Code
– Press the On / Enter key
– The indication of Code / Fingerp is displayed
– Press the Function key
– The Change code menu is displayed
– Press the On / Enter key
– The indication of Administrator is displayed
– Press the On / Enter key
– The indication of the Old code is displayed
– At this point you are asked to enter the Admin.
Code (factory setting 123456)
– Press the On / Enter key
– The indication of the New code is displayed
– Enter the new code
– Press the On / Enter key
– The indication of Repeat code is displayed
– Enter the new code
– Press the On / Enter key
– The indication of Code successfully changed is displayed
3. Creating a user with a code
– Press the On / Enter key
– The indication of Code / Fingerp is displayed
– Press the Function key
– The Change code menu is displayed
– By pressing the key 2 reach the Administrator menu
– Press the On / Enter key
– Admin setup Create user is displayed
– Press the On / Enter key
– Create code is displayed
– Press the On / Enter key
– At this point you are asked to enter the Admin.
Code (factory setting 123456)
– The indication of User 00x is displayed
– Please enter the user code and confirm it with ENTER
– Press the On / Enter key
– FS combination to be confirmed with ENTER is displayed
– Press the On / Enter key and accordingly the Function key
– After confirmation, Save with the On key is displayed.
18 | English
1
TRSE 6000