Xoro HSD 8450 Manuel D'emploi page 85

c. Create ID Tag
By activating this option the DVD Player creates the ID Tag information in the MP3
file.
d. Device — Destination
With this option you can define the device and destination where the MP3 file is
stored. If you had connected an USB device on the port, than the device USB will be
shown by the options. When you had connected a Card Media, than CARD will be
shown. In case of both kind of memory are connected, than you can choose the
device and destination.
4. In the next step you should choose the audio track or audio tracks.
i. If you want to convert all track from the Audio-CD into MP3, than move the pointer to
the bottom bar and highlight the op-
tion "SELECT ALL". All tracks will be
marked with a check (see the right
picture).
ii. If you want choose just only one or
two tracks from the Audio-CD, than
change from the option section into
the track section by the
Choose the track and marked them
with a check by pressing the ENTER
button.
5. After the selecting of the track or
tracks please mark the START field
in the bottom bar. Press the ENTER
button to start the conversion.
6. A new window appears on the
screen. There you can see the op-
eration and the status of the conver-
sion. If on the device (destination) is
actually a folder with CD Ripping and
any converted MP3 files with the
same file name there, than the de-
vice asked you to overwrite the files. I
you want, than please confirm by OK
field and if not, than you should can-
celled the whole conversion.
Note:
Please use the CD Ripping function only
for home entertainment, it can not be used for commercial purposes.
CD Ripping
button.
HSD 8450
33