Dryer Cycle Guide - Whirlpool YWET4024HW Guide D'utilisation Et D'entretien

Not all cycles and settings are available on all models.
Both the Normal and Delicate cycles are automatic dry cycles.
They give the best drying in the shortest time. These cycles
sense moisture in the load or air temperature and shut off
when the load reaches the selected dryness level. Drying time
varies based on fabric type, load size, and dryness setting.
Select either the Normal or Delicate cycle based on the fabrics
in your load. If you are unsure of the cycle to select for a load,
select the Delicate cycle (lower temperature) rather than the
Normal cycle (higher temperature).
WRINKLE SHIELD OPTION (120 V models)
™
This feature will run after your drying cycle is complete. It
periodically starts and stops the dryer, tumbling the load
without heat to help avoid wrinkling.
Items to dry:
Corduroys, work clothes
Lingerie, blouses,
washable knit fabrics
NOTE: If loads do not seem as dry as you would like, select Very Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
DRYER CYCLE GUIDE – TIMED DRYING
Not all cycles and settings are available on all models.
Timed Dry will allow the dryer to run for the selected time.
Items to dry:
Rubber, plastic, heat-
sensitive fabrics
Heavy, bulky, or
lightweight items
NOTE: Government energy certifications for this model were based on the Timed Dry cycle with the Maximum drying temperature
setting. The as-shipped defaults of Normal cycle, Less Dry, and the Wrinkle Shield
DRYER CYCLE GUIDE – AUTOMATIC DRY CYCLES
Cycle: Available Options:
Normal
Delicate
Cycle: Temperature:
Air Only No Heat
Timed Dry
High
240 V Models
None Medium to large loads of mixed fabrics and items.
None For gently drying delicate items.
Available Options:
Time Adjustment For airing out, refreshing, and loosening up
laundry without heating.
Time Adjustment Completes drying if items are still damp.
option (when applicable) were not used.
™
120 V Models
Cycle Details:
Cycle Details:
9