making a new ignition attempt.
If the burn pot is not cleaned and regularly
serviced, malfunctions and explosions may
occur inside the appliance. Be sure to remove
all traces of material and deposits from the
holes of the burn pot and to clean them each
time the ash is emptied or after each failed
ignition attempt. Make sure the burn pot
holes don't decrease in size as this may have
a negative effect on the safe operation of the
appliance.
Do not wash the product with water. Water
may infiltrate the unit and damage the electri-
cal insulation, causing electric shocks.
Do not sit/stand in front of the product in
operation for long periods.
Incorrect use of the product or incorrect
maintenance works may create a serious risk
of explosion in the combustion chamber.
Only use the fuel recommended by the manu-
facturer. The product must never be used as
an incinerator.
It is prohibited to use benzene, lamp fuel,
kerosene, liquid firelighter for wood, ethyl
alcohol or similar liquids to light or rekindle
a flame in this appliance. Keep these liquids
at a due distance from the appliance during
operation.
It is prohibited to insert other types of fuels in
the tank other than wood pellets.
Some tips to avoid corrosion phenomena:
• carry out routine cleaning operations to
avoid the build-up of ash deposits;
• feed the appliance only with fuel having
the characteristics described in the section
"Fuel
characteristics";
• Do not use solvents, acids, aggressive de-
tergents or products to directly clean the
glass or other components of the product;
• avoid leaving the product in unfavourable
ambient conditions (humidity, airborne sa-
linity, storms, etc.);
• if the appliance is not used for long peri-
42
ods (e.g. during the summer), disconnect
the combustion air inlet pipe and place
dessicant bags in the combustion chamber
to absorb the humidity in the air, making
sure to remove them when the product is
re-ignited .
004778021 - 08/04/2021