GF JRGURED Notice De Montage page 18

E
Installed position
The pressure-reducing valve JRGURED
functions independently of its installed position.
It should be installed in an easily
accessible location in the line.
For maintenance of the filter,
a minimum space of 60 mm must be
allowed. (See fig. on page 2).
Commissioning
Prior to commissioning the pressure-
reducing valve, the inlet line has to be
thoroughly flushed out.
For the commissioning please refer
to the separate operating and
maintenance instructions.
18
Resetting the pressure-reducing valve
Any change to the factory pressure
setting is carried out exclusively on the
responsibility of the person doing so.
For resetting the pressure, please
refer to the separate operating and
maintenance instructions.
Maintenance
For the maintenance of the coarse
filter, please refer to the separate
operating and maintenance in-
structions. These have to be given
to the building owner when the
installation is handed over.
Repairs to the pressure-reducing
valve JRGURED must not be
attempted.