•
Do not change the appliance.
•
Use the correct protective equipment. Refer to section
•
Install the appliance after the kitchen cabinets are installed to prevent possible damage to the appliance.
•
The appliance must be earthed and connected according to local standards.
INSTALLATION ITEMS
(Figure 1)
A
Induction hob
B
Glass valve
C
Grease filter
D
Grease collector
E
Duct adapter 2
F
Joint
Note:
There are more screws supplied than needed during the installation. There will be screws left after
completing the installation.
ACCESSORIES
Note:
The accessories are not included with the appliance. They are available from the manufacturer.
(Figure 2)
A
Pipes (Naber system)
B
Joint
C
Tape
TOOLS AND SUPPLIES
You need these tools and supplies during installing:
•
Tape measure
•
Pencil
•
Philips screwdriver
•
Flat head screwdriver
•
Sealant
•
Sealant gun
PROTECTIVE EQUIPMENT
Always wear protective equipment during installing:
•
Safety hat
•
Safety shoes
•
Safety gloves
REQUIREMENTS FOR INSTALLATION
(Figure 3)
The appliance is suitable for 4 different types of kitchen cabinets:
1. Kitchen cabinets with a depth up to 660 mm.
2. Kitchen cabinets with a depth up to 750 mm.
3. Kitchen cabinets with a depth up to 810 mm.
4. Kitchen cabinets with a depth of more than 810 mm.
The figure shows an overview of the dimensions of the appliance after installation.
'Protective equipment'
.
G
Cooker hood
H
Cover
I
Screw
J
Plastic locking pin
K
Seal
D
Flexible hose
E
Filtering kit with charcoal filter
English
•
23