6.6. MICRO SOFTWARE UPGRADE
This page allow to upgrade the web interface of the clock .
►
For this, you shall click on "browse..." select "image.bin" file, provided by After Sales
Service".
►
When "image.bin" selected, click on "Upload" button in order to send the updates. A
case will indicate the progress of the file sending.
►
When upgrade is finished, the clock will indicate that reboot is required (refer to Section
6. CONFIGURATION VIA WEB INTERFACE, Chapter 6.7. Reboot).
6.7. REBOOT
This page allows to refresh web page.
94
MDE-LEDI-1099V3.4