Technical Information; Switchboard External Line Access Code; To Insert A Pause; Recall - TIPTEL 114 Mode D'emploi

Technical information

Switchboard external line access code

You may need to enter an access code (e.g. 0) in order to get an outside line.
So that the switchboard has time to pick up an outside line, you may also need to
add a pause after the access code.
A Pause lasts 3.6 seconds.

To insert a pause

Begin dialling a number and press (P) where a pause is required.
Variant with switch for Flash Timing:
Begin dialling a number and press (

Recall

The button (R) is used when connected to certain switchboards, e.g. to transfer calls,
and for some Calling Features or those services available via your network provider.
Technical information
) where a pause is required.
25
en en