Rotation Mode - LaserLiner AQua-Master Mode D'emploi

AQua-Master
Operation

1. Rotation mode

The laser beam rotates through 360° at a
speed of 120 rpm. Pressing the button again
increases the speed to 300 rpm. During
rotation, the LED (K) is permanently lit.
Press once: Low speed
Press again: High speed
Press again: Spot mode, LED (K) blinks
2. Spot mode
To enter spot mode, keep pressing the
rotation mode button until the laser no
longer rotates and the LED starts to blink (K).
Press: Change position.
Press (SensoCommander only):
Change position in 90° steps.
3. Scan mode
A light-intensive segment of adjustable bre-
adth and position can be selected; the LED
(K) blinks.
Press: Scan mode
Press: Change position.
Press (SensoCommander only):
Change scan angle.
4. Hand receiver mode
Press
(SensoCommander only)
18
This SensoCommander mode allows
working over great distances; speed:
300 rpm; the LED (K) is permanently lit.
ENGLISH