Editing With Another Vcr - Sony SVO-1630 Mode D'emploi

Editing with another VCR

6
i n g e d i t
TAPE SPEED p STOP
INPUT SELECT
r REC
i n g e d i t
When recording on this VCR
r P
t s t a r y o u r e B e f o
(
p
• Press INPUT SELECT to display "LINE" in the display window.
• Press TAPE SPEED (SP/EP) to select the recording tape speed.
• Set the [TV] / [VTR] switch on the remote commander to [VTR] .
P PAUSE
1
Insert a source tape into the other (playback) VCR. Search for the point
to start playback and set it to playback pause.
2
[TV] / [VTR]
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press P PAUSE.
3
Press r REC on this VCR and set it to recording pause.
4
To start editing, press the P PAUSE buttons on both VCRs to release
the VCRs from pause.
For best results, press the pause button on the other VCR just before
pressing P PAUSE on this VCR.
i n g e d i t s t o p T o
INPUT
Press the p STOP buttons on both VCRs.
SELECT
TAPE
SPEED
When playing back on this VCR
r REC
t s t a r y o u r e B e f o
• Set the [TV] / [VTR] switch on the remote commander to [VTR] .
P PAUSE
• Select the input to which this VCR is connected on the other (recording)
VCR.
1
Insert a source tape into this (playback) VCR. Search for the point to
start playback and press P PAUSE.
p STOP
2
Insert a tape with its safety tab in place into the other (recording) VCR.
Search for the point to start recording and set it to recording pause.
3
To start editing, press the P PAUSE buttons on both VCRs to release
the VCRs from pause.
For best results, press P PAUSE on this VCR just before pressing the
pause button on the other VCR .
i n g e d i t s t o p T o
Press the p STOP buttons on both VCRs.
Notes
• To make your editing more precise, use the pause buttons on the VCRs.
• To cut out unwanted scenes while editing, press P PAUSE on the
recording VCR when unwanted scenes begin. When they end, press P
PAUSE again to resume recording.
39
(US)