Sony SVO-1630 Mode D'emploi page 20

Playing a Tape
Displaying the time counter and current time
Using the time counter
20
(US)
You can turn the display on the screen on or off.
1
MENU Press MENU and select 4.SET UP/USED TIME, then press
EXECUTE.
CURSOR
4/$ The SET UP menu appears.
[ SET UP ]
EXECUTE
TIMER PB END
REPEAT MODE
APC
DISPLAY
STOP TIMER
THREAD CHECK
[ USED TIME ]
DISPLAY HEAD
2
Press CURSOR 4/$ to flash the setting of "DISPLAY".
[ SET UP ]
CH +/–
TIMER PB END
REPEAT MODE
APC
DISPLAY
STOP TIMER
THREAD CHECK
[ USED TIME ]
HEAD
3
Select ON or OFF using CH +/–.
[ SET UP ]
TIMER PB END
REPEAT MODE
APC
DISPLAY
STOP TIMER
THREAD CHECK
[ USED TIME ]
HEAD
4
Press EXECUTE, and then press MENU to return to the normal
display.
To switch the display between the time counter and current
time
Press DISPLAY.
At the point on a tape that you want to find later, press COUNTER RESET
to reset the counter to "0H00M00S". When you rewind or advance the tape
to this point, refer to the counter.
COUNTER
RESET
Notes
• When a tape is reinserted, the counter returns to "0H00M00S".
• The counter will not work on tape portions with no recording.
• You can also refer to the time counter in the display window.
REW
REPEAT
ON
OFF
5M
ON
00000H
REW
REPEAT
ON
OFF
5M
ON
00000H
REW
REPEAT
ON
ON
5M
ON
00000H