Sony SVO-1630 Mode D'emploi page 37

Case 1 t h e a t a y i n g r e c o r d i n g / p l s t a r t
10:00 10:50
Program 1
(listed first )
Program 2
(listed next )
Will be
cut off
b e f o r e p l a y i n g r e c o r d i n g / s t a r t
Case 2
10:30
. . i n g . p l a y d i n g / r e c o r
Program 1
Will be
cut off
Program 2
10:00 11:00
6
Press EXECUTE.
The VCR returns to the original screen. When there are any other timer
settings left in the TIMER REC/PLAY menu, press TIMER ON/OFF
to return to recording/playback standby.
Note
You can use TIMER on the VCR instead of TIMER ON/OFF on the
remote commander.
To check the timer settings during timer recording/playback
Press MENU and select 2. TIMER REC/PLAY SET. After checking, press
EXECUTE, and then MENU to turn off the display.
When the timer settings overlap
The VCR will not record/play overlapping programs. If any of your timer
settings overlap, change the settings.
t o p r o g r a m s t w o p r e s e t y o u I f 1 : C a s e
. . m e . t i s a m e
The program listed first in the TIMER REC/PLAY menu has priority over
the other programs. The timer settings of lower priority programs will start
11:30
recording/playing when the VCR stops recording/playing the higher
priority program.
t o 1 p r o g r a m p r e s e t y o u I f 2 : C a s e
s h e d 11:30 f i n i i s 2 a m p r o g r
Program 1 will start recording/playing after program 2 has finished.
Note
The VCR starts recording 15 seconds before the preset start time.
About memory back-up function
The VCR has a memory back-up function. Even if the power is
interrupted, settings and adjustments are retained for up to 30 days using
the built-in rechargeable battery.
37
(US)