Kratki VIKING Instructions De Montage page 42

User Menu items:
- Combustion Management
- Combustion Output
- Calibrate Auger
- Calibrate Fan
- Heating Management
- Heat Output
- Room Temperature
- Remote Control (this option is disabled for the VIKING pellet stove)
- CHRONO
- Mode
- Daily
- Weekly
- Weekend
- Schedule
- Daily
- Weekly
- Weekend
- Fill Auger
Table 4. User Menu
Item
Moc
This feature modifies the combustion output. You can switch between Automatic
and Manual. In the Automatic mode, the controller will adjust the combustion
output to reach the temperature set on the thermostat. The letter A is displayed
at
displayed at
Combustion
Management Calibrate Auger
This modifies the speed setting of the pellet auger within ±10 % of each combu-
stion output level.
Calibrate Fan
This modifies the speed setting of the flue exhaust fan within ±10 % of each
combustion output level.
Heat Output
This controls the heat output turbine speed to regulate the heating of the room.
You can switch between Automatic and Manual. In the Automatic mode, the con-
troller will adjust the heat output level to reach the temperature set on the ther-
mostat as soon as possible. The letter A is displayed at
user can set one of the five levels. The letter M is displayed at
level is displayed with:
Heating
Management
Room Temperature
This controls the room temperature set on the thermostat. You can set the tempe-
rature between 10 and 40 °C.
With the settings in the CHRONO Menu, you can schedule the operation of the
pellet stove for the whole week. First, enable one of the three modes available in
the menu. Next, set the times of automatic ignition and automatic turning off of
the pellet stove.
42
. In the Manual mode, the user can set one of the five levels. The letter M is
. The combustion output level is displayed with: :
Description
. In the Manual mode, the
. The heat output