Product Description - Kratki VIKING Instructions De Montage

flue gas chimney shall meet the applicable building regulations.

PRODUCT DESCRIPTION

The VIKING pellet stove features an attractively modern design of its finish. The front of the pellet stove
is made of tempered glass panels. The hearth enclosure is made from steel finished by powder coating.
The combustion chamber is lined with cast-iron fire impingement sections. The touch control panel is
covered by a glass panel. The hearth door features a single decorative glass pane made of a refractory
ceramic material which can resist up to 800 °C. The integrated pellet hopper auger and the state-of-
the-art automatic controls, the VIKING requires only the minimum of effort to operate it. The opera-
tion of the VIKING pellet stove largely involves using the touch control panel to choose the operating
modes. The interface of the touch control panel is based on an intuitive menu. This makes operation
of the controls very easy. The pellet is kept in a separate pellet hopper for easy feeding into the stove.
The pellet hopper has a storage capacity of 15 kg. This provides a stock of fuel for a maximum of 25
operating hours. The air intake port can provide the combustion air from indoors or the outdoors.
Combustion
air intake
Flue vent exhaust
Power fuse
Power cord receptacle
Fig. 1. Overview of the VIKING
Pellet hopper cover
Touch
control
panel
Hearth
door
Handle
27