Manufacturer´s Data; Technical Specifications - Kratki VIKING Instructions De Montage

MANUFACTURER'S DATA
Manufacturer:
Contact details:
Reference European standard

TECHNICAL SPECIFICATIONS

Table 1. Technical specifications of the VIKING pellet stove
Parameter
Fuel consumption
Required chimney draught
Flue gas temperature
Flue gas temperature at exhaust
Flue gas mass flow
Efficiency
Total heating power
Water-carried output
Output transmitted to the room
CO emission (at 13% O2)
Maximum operating pressure
Power supply
Rated voltage
Rated frequency
RECOMMENDED FUEL TYPES
This heating appliance has been designed to generate heat by automatic combustion of wooden pel-
lets. Wooden pellets are manufactured by high-pressure compression of waste wood material, inclu-
ding chips, sawdust, shreddings, and farming waste, including straw and seeds of various oil plants.
The fuel type recommended for this heating appliance is pellets sized 6-8 mm in diameter and 40 mm
long. The maximum moisture content of fuel shall not exceed 10%.
INSTALLATION
This heating appliance must be installed and serviced by competent technical service personnel only.
This Manual provides the information necessary to assure the safety of installation and problem-free
and reliable operation of the pellet stove. Read the entire Manual and provide it to all users of the he-
ating appliance. Never modify the heating appliance in any way. Do not attempt to alter or modify the
design or any component of the heating appliance. Any modification or alteration made to the heating
appliance will void its warranty and certificate.
Kratki.pl Marek Bal
Kratki.pl Marek Bal
ul. Gombrowicza 4, 26-660 Wsola, Polska
tel. +48 48 384 44 88
fax +48 48 384 44 88
www.kratki.com
EN 14785
Units
Kg/h
Pa
°C
°C
g/s
%
kW
kW
kW
%
Bar
W
V
Hz
Rated output Derated output
2.0
10
205
241
6.2
86.5
8.0
-----
8.0
0.004
-----
380
230
50
0.6
9
113
137
3.8
87.0
2.5
-----
2.5
0.053
-----
380
230
50
29