Ironing With Steam; End Of Use; Emptying The Tank - Imetec P8403 Instructions D'utilisation

The INTELLI program indicator light (8D) will flash to indicate that the product is heating up. This program
is suitable for perfectly ironing all types of fabric.
Pressing the program selection button (8C) makes it possible to select the MAX program (8E) to iron
difficult garments, such as jeans, cotton etc.
EN
The plate temperature LED (11) indicates that the iron is warming up.
Wait until the indicator light of the selected program stops flashing before beginning to iron.
It is recommended that you place a cloth between the iron and the fabric when using the iron
for the first time.
Before starting ironing, direct a jet of steam onto the cloth by lifting the iron slightly so that any
residual condensation comes out.
Fabrics with the following symbols may not be ironed:

IRONING WITH STEAM

Press the steam request button (13) to iron with steam.
The soleplate temperature LED flashes intermittently while ironing, thereby indicating that the
selected temperature is maintained.
IRONING WITHOUT STEAM (DRY)
If you want to iron without steam, don't press the steam request button (13).
STEAM BOOST
With this function, the product delivers steam continuously.
To activate the "Steam boost" function, quickly press the steam request button (13) three times.
To deactivate the "Steam boost" function, press the steam request button (13) again.
Position the ON/OFF switch (5) to turn the product OFF.
Unplug the power supply cable with plug (7) from the socket.
Wait for the product to cool completely before putting it away.
NOTE: If the appliance is not to be used for several weeks, wait for the appliance to
cool down completely before emptying the water reservoir completely according to the
instructions in the relevant chapter.
When the appliance is switched on again, refill the reservoir as indicated in the relevant
chapter.

EMPTYING THE TANK

Position the ON/OFF switch (5) to turn the product OFF.
Unplug the power supply cable with plug (7) from the socket.
Wait for the product to cool down completely.
Open the water fill cover (1).
Tilt the base of the appliance so that all the water in the tank (3) flows out.
Close the water fill cover (1).
Put the appliance away.
18

END OF USE