Imetec P8403 Instructions D'utilisation page 18

• If the supply cord is damaged it must be replaced by an authorised
technical service centre, so as to prevent all risks.
• The electrical safety of this appliance is only guaranteed
EN
when it is connected correctly to an effective earthing
system as required by applicable electrical safety standards.
This important
before
If in doubt request a thorough check of the system by a qualified
technician.
• DO NOT immerse this appliance into water or other liquids. For any
cleaning and maintenance operation refer to the instructions in the
relevant chapter.
• DO NOT leave this appliance in contact with or near materials and
surfaces that are easily flammable or can be damaged by heat.
•
DO NOT dispense steam when the iron is resting on its mat.
• The iron must be used and rested on a stable surface.
• Always place the appliance with the stand, if any, on a heat-resistant,
stable, flat surface.
• When placing the iron on its stand, ensure that the surface on which
the stand is placed is stable.
•
DO NOT use chemical additives, scented substances or descaling
agents.
• The plug must be removed from the socket-outlet before the water
reservoir is filled with water.
• See the external packaging for the characteristics of the appliance.
• Use only the supplied accessories that are an integral part of the
appliance.
•
DO NOT use extension cords or adaptors.
14
safety
connecting the
requirement
appliance to
must be verified
the mains supply.