Speedlink BullFrog SL-6540 Mode D'emploi page 9

Software Installation:
1. Insert the software diskette into 3.5" floppy drive of
your computer
2. Click START then select RUN
3. Type "a:setup" and press ENTER key
4. Follow on screen instructions to complete the
installation.
Hardware Connection:
1. Plug the USB connector to your computers' USB
port, Windows system may ask you to put
Windows 98/ME/2000 disk in the computer in
case to install a new device.
2. Click START then select Control Panel, click on
GAME CONTROLLER
3. Select Bullfrog Gamepad
4. Click on PROPERTIES. In this panel you can test
all functions of the Game Pad including the Vibration
function.
D
GB
F
E
I
9