8.3. Inserting a USB device
If necessary, press the USB button to switch to USB mode, or press the
ton repeatedly until you reach the USB mode.
The tracks are read and the display shows the total number of albums and tracks
in stop mode.
CAUTION!
To avoid damaging the device, do not use a USB extension ca-
ble and do not connect the device directly to the USB port of a
computer.
The USB connection is only designed to be used for USB mem-
ory sticks; other external storage media such as external hard
disks cannot be operated via the USB port.
8.4. Playback functions
8.4.1. PLAY, PAUSE, STOP, track search
Press the button on the device or on the remote control in order to start
playback.
To pause playback, press the button again.
Press again to continue playback from the same point.
To jump to the start of a track, press the button during playback. Press to
playback the next track.
If you hold down or during playback, you start the fast forward/rewind
functions.
Press the button on the device or STOP on the remote control in order to
stop playback. The device goes into stop mode.
8.4.2. Folders in MP3 format
In order to change the folder on an MP3 data carrier, press the ALB- or ALB+
buttons.
8.4.3. REPEAT
Press the REPEAT button.
"REP" appears on the display; the current track will be repeated.
In MP3 mode, press REPEAT again to repeat the whole folder. The display will
show REP ALB.
Press the REPEAT button again.
REP ALL appears on the display; all tracks will be repeated.
To end the repeat function, press the REPEAT button. The repeat indicator will
disappear from the display.
40
but-