Preparing To Measure Blood Pressure; Inserting The Batteries - boso medilife PC3 Mode D'emploi

Preparing to measure blood pressure

Inserting the batteries

The battery compartment is located on the right
upper side of the housing.
Insert 2 x 1.5 Volt micro time (LR03). Only use
batteries of the given specifications and follow
the polarisation markings in the battery compart-
ment. Never mix old with new batteries, or batte-
ries of different manufacture.
Slide the lid back into its original position.
26
Remove batteries if the unit is not to be used for
a longer period of time.
The unit shows the following function symbols:
battery fully loaded.
battery partially loaded.
flashing! No further measurements
possible; replace battery.
Used batteries and recharging units do not
belong into the household bin. They can be depo-
sited at special refuse centres for used batteries.
Contact your townhall for information.
Important information on replacing batteries:
After replacement of batteries, please check date
and clock settings.