16. Menu system settings
16.1. Equaliser
Here you can select a default sound format or configure your own.
Select one of the following sound formats
NORMAL, FLAT, JAZZ, ROCK, MOVIE, CLASSIC, POP, NEWS, MY
EQ or MY EQ PROFILE SETUP and confirm with the OK dial. The setting
will take effect immediately.
MY EQ
If you have set up your own sound format in the following entry, select MY EQ
to directly apply the sound format.
MY EQ PROFILE SETUP
Here you can configure your own sound format for the MY EQ setting.
Adjust the bass, treble and volume by turning the OK dial and press the OK but-
ton to store the entry.
Confirm the following query with YES to save the sound format.
16.2. Network
Network Wizard
Select this menu item to start a network search.
Then enter the WEP/WPA key to connect the device to the wireless AP.
PBC WLAN Setup
Here you can set up a WPS connection:
Activate the WPS connection on the device which supports WPS and then confirm
the connection on the Internet radio by selecting YES and confirm with the OK but-
ton.
View Settings
Information on the currently connected network and the radio's MAC address is dis-
played here.
Wlan region
Here you can select the WLAN region in which you are operating the device.
Manual Settings
Select Cable (Ethernet) or Wireless (WLAN) and set the respective DHCP function
to On or Off.
NetRemote PIN-Setup
In this entry you can assign a new four-digit code which needs to be entered when
connecting using the Lifestream IR application on a smartphone or tablet PC.
80 of140