Roco ESU Lok Sound Mode D'emploi page 8

GB
8
8063931924 VI_2012.indd 8
Analog operation
When operated with a conventional transformer,
the locomotive performs like a locomotive with-
out a decoder. However, the locomotive will
begin to move only after a control voltage of 5
to 5.5 Volts (DC) or 8 to 8.5 Vots (AC) has been
reached, because the decoder requires a certain
minimum voltage simply to operate.
Sound functionality is possible dur-
ing analogue operation and begins
at approx. 4.5V (DC) or 6.5V (AC).
 In DC operation trouble-free running with
pulse-width or phase-control controllers can-
not be guaranteed.
 In AC operation the control knob is turned
to the left through the zero position as usual
to change the running direction: keep the
regulator knob pressed down for about half a
second to ensure that the reversing command
has been reliably identified!
The locomotive should first have
come to a standstill in every case.
Possible Settings in
DCC Digital Operation
The most important CV's
For the preset factory values please see the
information sheet enclosed with the locomotive
or decoder.
For the Lokmaus, the CV's and the correspond-
ing values from 0 – 99 are programmable.
For the multi MAUS, the CV's from 1 – 256
and the corresponding values from 0 – 255
are programmable.
CV
1
Adress (= short Adress)
2
Starting voltage
(lowest creep speed)
3 Acceleration time (from stan-
ding to maximum speed)
4 Braking time (from maximum
speed to full stop)
5
Maximum speed
6 Average speed (by middle dri-
ving stage)
7
Decoder Version Number (only
read! Readable only on rea-ding-
capable amplifiers/centres)
8
Reset Function
(Returns all values to the factory
settings; the manufacturer's ID
is readable on reading-capab-le
amplifiers/centres)
13 Analogue Modes F1-F8 (00 – no
function in analogue mode)
01 – Function F1 02 – Function F2
04 – Function F3 08 – Function F4
16 – Function F5 32 – Function F6
64 – Function F7 128 – Function F8
Several things happen at the same
time when several functions are
activated via CV's in analogue
operation.
Value
01 – 127
01 – 255
00 – 255
00 – 255
00 – 64
00 – 64
08
00– 255
30.05.2012 12:28:57