Installation Configurations Linda - Palazzetti ECOFIRE LINDA Manuel D'installation, D'utilisation Et De Maintenance

• Remove the elbow (D)
• Remove the preform (E) on the back panel (A)
and insert the flexible hose (B) to connect it to
an outside air intake (Fig. 35).
• Tighten the hose (B) with the previously loos-
ened metal hose clamp (F)
• Refit the back panel (A)
A
E
82
F
B
D
Fig. 35

7.3 Installation configurations LINDA

The stove can be installed in different ways de-
pending on personal needs:
• Single wall pipe and air intake in room
• Single wall pipe and outside air intake
7.3.1 Single wall pipe and air intake in room
In this case the combustion air will be taken from
the room.
To achieve this:
• Remove the back panel of the stove (A)
• Remove the preform (B) on the back panel (A)
• Remove the preform (C) on the side panel (D)
• Connect the flue gas pipe (E) (Fig. 36)
• Refit the back panel (A)
A
D
C
E
B
Fig. 36
004778560 - 02/11/2021