Palazzetti ECOFIRE LINDA Manuel D'installation, D'utilisation Et De Maintenance page 81

7.2.2 Single wall pipe and air intake in room
In this case the combustion air will be taken from
the room.
To achieve this:
• Insert the support (A) supplied standard.
• Connect the flue gas pipe (B) (Fig. 33)
A
004778560 - 02/11/2021
ITALIANO
7.2.3 Single wall pipe and outside air intake
In this case the combustion air is taken directly
from outside, from the back of the stove.
• Remove the back panel of the stove (A)
• Disconnect the flexible combustion air hose (B)
at the top and bottom.
• Insert the support (C) (supplied with and
placed inside the combustion chamber during
transport).
B
• Connect the flue gas pipe (D) (Fig. 34)
C
A
Fig. 33
ENGLISH
D
B
B
FRANÇAIS
Fig. 34
81