Power Connection - baumarkt TC50A Mode D'emploi

Information for installation
To avoid disturbing, visible cables later, the power connection should also be

Power connection

planned before installation.
Tasks on the electrical installations must only be carried out by
Danger!
qualified personnel. If an additional socket is required for the
appliance, commission a specialist electrical firm.
The statutory regulations must be adhered to enable access to the plug. That
means that after installation of a cover, the plug must also be accessible.
However, if after installation the plug is not accessible, a switch must be installed,
in accordance with the standards DIN EN 60335-1 and IEC 61058-1 that ensures
an all pole disconnection of the appliance.
Commission an authorized electrician to carry out the installation of the
extraction hood and electrical installation!
Information
9
English