Parts List - baumarkt TC50A Mode D'emploi

Parts List

In order to make the installation of your extraction hood as simple as possible, all
individual parts are consecutively numbered: The number in bold print is the part
number that assists you in identifying the individual components.
Before starting installation, please check to make sure that all individual
components are present and undamaged.
1 Extractor hood
2 Exhaust air connection
3 Protective cover
4 Assembly rod for fleece grease filter (2x)
5 Carbon filter (required for circulating air mode)
Accessories (not included in the scope of delivery)
6 Exhaust air hose (required for extraction mode) maximum
length 5 m
This material is not included in the scope of delivery. It is available
Material for wall installation / below unit installation
at the specialist retailer (e.g. a hardware store).
Only use installation material that is suitable for the
Caution!
constitution of your walls and kitchen units. If you
are unsure about the selection, seek advice from a
specialist.
7 2 screws 50mm, ø 6mm
Wall installation
8 2 wallplugs ø 8mm
9 2 screws 35mm, ø 5mm
10 2 wallplugs ø 6 mm
11 4 screws, ø 6 mm
Below unit installation/Cupboard installation
Information
1
2
3
4
5
6
7
8
9
10
11
7
English