Specifications - Sony digipad MHC-DP1000D Mode D'emploi

Specifications

AUDIO POWER SPECIFICATIONS:
(MHC-DP1000D USA model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
with 8 ohm loads both channels driven, from
120 Hz – 10 kHz; rates 100 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
Continuous RMS power output
Center speaker:
Rear speakers:
Amplifier section
Canadian model:
MHC-DP1000D
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Rear speakers:
Total harmonic distortion less than 0.07%
European model:
MHC-DP1000D
DIN power output (rated) 60 + 60 watts
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Rear speakers:
Music power output (reference)
Front speaker:
Center speaker:
Rear speakers:
30 watts
30 + 30 watts
(8 ohms at 1 kHz, 10%
THD)
100 + 100 watts
30 watts
30 + 30 watts
(8 ohms at 1 kHz, 10%
THD)
(8 ohms at 1 kHz, 70 W)
(8 ohms at 1 kHz, DIN)
80 + 80 watts
30 watts
30 + 30 watts
(8 ohms at 1 kHz, 10%
THD)
150 + 150 watts
60 watts
60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
Other models:
MHC-DP900D
The following measured at AC 120, 220, 240 V,
50/60 Hz
DIN power output (rated) 130 + 130 watts
Continuous RMS power output (reference)
MHC-DP1000D
The following measured at AC 120, 220, 240 V,
50/60 Hz
DIN power output (rated) 90 + 90 watts
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Rear speakers:
Inputs
GAME IN:
(phono jacks)
MD (VIDEO) IN:
(phono jacks)
OPTICAL IN:
(Square optical connector jacks, front panel)
wavelength
MIC:
(Except for North
American and
European models)
(phone jack)
Outputs
MD (VIDEO) OUT:
(phono jacks)
VIDEO OUT:
(phono jack)
S-VIDEO OUT:
(4-pin/mini-DIN jack)
PHONES:
(stereo mini jack)
SPEAKER:
(MHC-DP900D only)
FRONT SPEAKER :
(MHC-DP1000D only)
REAR SPEAKER:
(MHC-DP1000D only)
CENTER SPEAKER:
(MHC-DP1000D only)
SUB WOOFER:
(6 ohms at 1 kHz, DIN)
180 + 180 watts
(6 ohms at 1 kHz, 10%
THD)
(8 ohms at 1 kHz, DIN)
120 + 120 watts
40 watts
40 + 40 watts
(8 ohms at 1 kHz, 10%
THD)
voltage 250 mV,
impedance 47 kilohms
voltage 450 mV/250 mV,
impedance 47 kilohms
——
sensitivity 1 mV,
impedance 10 kilohms
voltage 250 mV
impedance 1 kilohms
max. output level
1 Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
Y: 1 Vp-p, unbalanced,
Sync negative,
C: 0.286Vp-p,
load impedance 75 ohms
accepts headphones of
8 ohms or more
accepts impedance of 6 to
16 ohms
accepts impedance of 8 to
16 ohms
accepts impedance of 8 to
16 ohms
accepts impedance of 8 to
16 ohms
Voltage 1 V,
impedance 1 kilohms
continued
GB
59