Sony digipad MHC-DP1000D Mode D'emploi page 33

** The letters in the program format display mean the
following sound component:
L: Front (left)
R: Front (right)
C: Center
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural): The rear component of the
Dolby Surround processed signal or the
Dolby Digital signal.
LFE: LFE (Low Frequency Effect)
The display examples are as follows:
• PCM (stereo)
PROGRAM FORMAT
PCM 48kHz 24bit
• Dolby Surround
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
L C
S
• Dolby Digital 5.1ch
When an LFE signal component is output,
"LFE" is enclosed in a solid line. When an LFE
signal component is not output, "LFE" is
enclosed in a broken line.
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C
LFE
LS
• DTS
"LFE" is always enclosed in a solid line
regardless of the LFE signal component being
output.
PROGRAM FORMAT
DTS 3/2.1
L C
LFE
LS
R
R
RS
R
RS
Note
When the signal contains rear signal components such
as LS, RS, or S, the DSP effect is enhanced (page 48).
GB
33