Call Reception In The Smartphone - Fermax F1436 Manuel De L'utilisateur

Options: High quality (25 fps), low quality (10 fps), Still picture. Important to fix a
low quality when using 4G networks to connect to the panel in order to earn data
consumption.
- Wifi setup. You can change the WIFI network to which the master monitor must
connect, in case you have several options.
- Call reception. Enable or disable the call reception from panel. Disable in case you
don't want to be disturbed. You must be sure that this option is enabled if you
want receive calls from panel.
- Firmware version. Shows current firmware version in monitor and indicates if there
is available an improved one, allowing to update it. New firmware availability is no-
ticed by a red dot in the setting icon. NOTE: during firmware update, it is very im-
portant to keep the power of the monitor ON. If not, the monitor can be damaged.
- Synchronize date and time. Sets the master monitor with the smartphone date &
time.
- Delete. Deletes the device (house) from the app. It is required in case you must
repeat the process of assigning a WIFI network to the monitor if it is changed.

1.6 Call reception in the smartphone

In iOS App call is received through a push notification except if the app is open. You must
press the notification to open the app and access the preview page. The notification gen-
erates a call tone with a long length. Be sure that you configure the notification reception
for the Way-Fi App according to the following settings:
16