Basic Operations
Listening to the radio
SOURCE / OFF
SEEK
1
Press (SOURCE/OFF) repeatedly until "TUNER" appears.
2
Press (MODE) repeatedly until the desired band (FM1, FM2, FM3, MW
or LW) appears.
3
Perform tuning.
To tune automatically
Press (SEEK) +
Scanning stops when the unit receives a station. Repeat this procedure until the desired station
is received.
To tune manually
Press and hold (SEEK) +
repeatedly to fine adjust to the desired frequency.
Tip
For details on other radio functions, see "Advanced Operations — Radio" on page 22.
With the card remote commander
Use (SRC) instead of (SOURCE/OFF), and .m/M> instead of (SEEK) –/+.
14
MODE
.
/–
to locate the approximate frequency, then press (SEEK) +
/–
.m/M>
SRC
MODE
/–