AUtec Modular Série Manuel De L'utilisateur page 21

LIMKNPU2
!
It should be remembered that in some countries must be respected
rules which control:
- the use and/or possession of a radio remote control;
- the use of operational frequencies which have not yet been
harmonised in Europe.
All the indications that must be observed can be found in the "Limitations &
Authorizations" document, which is included in the product's
documentation.
As required by the Machines Directive and relative harmonised standards, all machines
must undergo a risk analysis; therefore it is necessary to evaluate, within the limits of this
analysis, if the machine can be radio remote controlled.
The machine producer and/or the person who decides upon radio remote control use
and installation is responsible for this analysis.
Autec cannot be held responsible if the risk analysis is not carried out correctly.
To guarantee correct radio remote control operation, all current regulations regarding
safety at work and accident prevention should be respected. All current user country
national laws regarding the use of both the machine and the radio remote control MUST
ALWAYS be respected.
Autec cannot be held responsible if the radio remote control is used in unlawful
working conditions.
!
In any cases of emergencies, faults or damaged parts, ALWAYS stop
the "machine + radio remote control" system until the problem has
been solved.
Any damaged parts can ONLY be replaced by authorised
Autec personnel, and only using original Autec spare parts.
LIMITATIONS & AUTHORIZATIONS
Page 3