Skil AG242001 Guide D'utilisation page 15

Installing the Side Handle (Fig.8)
Disconnect the plug from the electrical outlet.
The side handle may be installed on the right
side, the left side, or the upper surface of the
tool. Thread the side handle into the desired
operating position.
Securely tighten the side handle by turning it
clockwise.
Paddle Switch
To unlock the switch and turn tool on: push the
"lock-off" switch release lever forward to unlock
paddle switch, then squeeze paddle switch
(Fig. 9).
To switch tool "off": release pressure on paddle
lever. The switch is spring loaded and will
return to "off" position automatically.
Grinding Operations
Selecting grinding wheels
WARNING
exceed the recommended wheel diameter.
Disc grinding wheels
Grinding wheels should be carefully selected in order to use the grinder most efficiently.
Wheels vary in type of abrasive, bond, hardness, grit size and structure. The correct type of
wheel to use is determined by the job. Use disc grinding wheels for fast grinding of structural
steel, heavy weld beads, steel casting, stainless steel, and other ferrous metals.
Before using a grinding wheel, be certain that its maximum safe operating
speed is not exceeded by the nameplate speed of the grinder. Do not
Fig. 8
Loosen
Tighten
Loosen
Tighten
Fig. 9
Tighten
Loosen
15