General Information; Basic Safety Guidelines - KERN and SOHN ALJ-A03 Mode D'emploi

1 General information

2 Basic safety guidelines

3
This ionizer is equipped with blades supplied with high
voltage, in the immediate vicinity of which positive and
negative ions are generated as a result of corona dis-
charge. They are attracted through the weighed material
with static charge, thus neutralizing the interfering static
charge. This eliminates also the forces leading to false
weighing results (e.g. false weighing result, floating weigh-
ing value).
WARNING
The ionizer is designed solely for use in connection with
electronic balances. Do not use it for any other purpose.
Do not use the ionizer in any rooms with explosion haz-
ard present. Serial installation is not an explosion-proof
one.
Protect the ionizer
ty/temperature, vapours and dust.
Ensure location free from water/oil.
Do not expose the ionizer to long-term heavy moisture.
Any unexpected condensation (condensation of the air
humidity on the ionizer) may take place when a cold de-
vice is placed in a much warmer environment. In such
circumstances leave the ionizer, not connected to the
power supply, for ca. 2- hours to ensure acclimatisation
to the ambient temperature.
When the ionizer is on, do not touch any ion source, see
the label to the left.
Because a high-voltage technology is used, handle the
ion source and outputs with care.
Do not dismantle and do not modify the ionizer.
Prevent any damage caused by falls, vibrations or im-
pact, see the label to the left.
from high ambient
ALJ-A03-BA-e-1810
humidi-