Invacare Robin Manuel De Maintenance page 11

a. Remove the screws securing the plastic shells from the rail
motor.
b. Pull the plastic shells away from each other to remove them
from the rail motor.
c. Remove the M6 screw securing the rail motor to the hoist.
1586747-A
d. Separate the rail motor from the hoist.
CAUTION!
Risk of damage
It is possible to remove the hoist from the rail motor
without removing the rail motor from the rail system.
To avoid damage to the hoist:
– Always support the hoist when removing the M6
screw.
Service
11