Charging Mode; General Information; Charging The Battery - Fronius Acctiva Smart 25 A Instructions De Service

Charging mode

General informa- Charging mode is used for:
tion -
-
Charging the bat-
tery
Danger due to a faulty battery.
This can result in damage to property.
► Before charging, ensure that the battery to be charged is fully functional.
1
4
Danger if the wrong battery voltage is set.
This can result in damage to property.
► Always ensure that the correct battery voltage is set.
64
Charging or conservation charging with the battery either fitted or removed
Charging while vehicle consumers are switched on
NOTE!
Plug in charger mains plug
2
3
Connect the battery, observing the correct polarity. Because the charging terminals
are de-energised, there is no risk of sparks when connecting to the battery, even if the
charger is already connected to the mains supply.
- Connect the red charging lead to the positive pole (+) of the battery
- Connect the black charging lead to the negative pole (-) of the battery
NOTE!
Charging mode is automatically started af-
ter the charger is connected to the mains.
Use the Menu key to select the "Ah" or "Battery type" setting.
Use the Up/Down keys to enter the required value (e.g. 100
Ah or "Wet" battery type).
The charger automatically identifies the
battery, e.g. 12 V, and starts the charging
process after 5 seconds.
If the battery voltage is not correctly identi-
fied (e.g. in the event of a deeply dischar-
ged battery), you have 5 seconds to enter
the correct battery voltage, as follows: