Starting The Melting Process - DENTAURUM Dublitherm compact Mode D'emploi

5.6 Starting the Melting Process

Ensure the lid is closed properly.
First, the gel is heated to 40 °C, the LED labelled „Heating" lights red, and the display shows the current tempe-
rature in the tank.
When the temperature reaches 40 °C, the mixing paddles start automatically.
i
Note Press the Menu button during the melting process to display both the pre-set melting and
pouring temperatures for 3 seconds each. After a further 3 seconds, the display returns to show
the current temperature.
Once the pre-set melting temperature is reached, the „Heating" LED turns off and the „Cooling" LED lights blue.
The heating elements are turned off and a ventilator cools the melting tank by a cooling channel.
Timer
Start
Stop
Menu
Reset
Timer
Start
Stop
Menu
Reset
Timer
Start
Stop
Menu
Reset
dublitherm compact en
EN
30