Hansgrohe Metris C 15753 1 Série Instructions De Montage / Mode D'emploi / Garantie page 8
Masquer les pouces
Voir aussi pour Metris C 15753 1 Série:
Table des Matières
Publicité
5
6
7
8
English
Add ½" to this measurement.
Cut each screw so that it is X + ½" long.
Open the stops.
Install the carrier plate so that the notch is at
the bottom.
Install the carrier plate screws.
Slide the thermostatic mixer sleeve on so that
the indexing mark is at the 1:00 position.
Install the volume control sleeve.
Install the escutcheon.
Publicité
Table des Matières
