Technical Information; Installation Considerations - Hansgrohe Metris C 15753 1 Série Instructions De Montage / Mode D'emploi / Garantie

⅝"
⅝"
Service Stops / Butées d'arrêt
d'isolation / Cierres de servicio

2⅝"-3¾"
2⅝"-3¾"
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate @ 44 PSI
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• This trim is for use with iBox Universal Plus
model 01850181 (not included).
• To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 10°F. In Massachusetts,
the maximum output temperature can be no
higher than 11° F.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
closed
ferme
cerrado
open
ouvert
abierto
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
8 GPM