Hansgrohe Metris C 15753 1 Série Instructions De Montage / Mode D'emploi / Garantie page 10

8
9
3 mm
10
2 mm
2.5 mm
10
1.
2.
1.
2.
English
Place a dab of waterproof sealant at each
grout joint.
Lubricate the adapter stems with a small
amount of white plumber's grease (1).
Install the handle adapters and screws ().
Tighten the screws using a 3 mm Allen wrench.
Install the volume control handle (1).
Tighten the screw using a  mm Allen wrench.
Install the thermostatic mixer handle so that
the safety stop override button is at the :00
position ().
Tighten the handle screw using a .5 mm Allen
wrench.