Hansgrohe Metris C 15753 1 Série Instructions De Montage / Mode D'emploi / Garantie page 6

2
5 mm
3
4 mm
4
6
1.
2.
English
Seal the wall around the
plaster shield with water-
proof sealant (1).
Failure to seal the wall can
lead to possible water dam-
age.
Remove the flush insert screw using a 5 mm
Allen wrench ().
Remove the flush insert and seals.
Insert the function block.
Install and tighten the function block screws
using a 4 mm Allen wrench.
Measure the distance from the front of the
plaster shield to one of the screw-in flanges
("X").