Hansgrohe Metris C 15753 1 Série Instructions De Montage / Mode D'emploi / Garantie page 12

1
2
3
1
English
Set the high temperature
limit stop**
Remove the clip and stop ring from the car-
tridge stem.
Turn the water on to one of the functions.
Turn the cartridge stem until the output water
is the desired high temperature, usually 110°
- 11° F**.
Replace the stop ring so that the tooth is
against the cartridge stop. Replace the clip.
It should not be possible to turn the stem
further counter-clockwise.
**Follow all applicable local plumbing
codes when setting the high temperature
limit stop.