Telephone Settings; Set The Time And Date - Topcom ALLURE 400 Manuel D'utilisateur

Topcom Allure 400
5 Buttons / connections
(See picture on folded cover page)
1. In use LED
2. LCD display
3. Direct memory keys
4. Pause / VIP key
5. Ringtone / Hold key
6. Up key
7. Delete key
8. Indirect memory key
9. Down key
10. Numerical keypad
11. Redial key
12. Handsfree key
13. Flash / LCD contrast
14. Curl cord connection
15. Redial list key
16. Program key
17. Hook Switch
18. Line connection
19. Handsfree volume switch
20. Ring volume switch
6 Installation
Put batteries in the battery compartment to acti-
vate the display :
• Open the battery compartment at the bottom
of the unit.
• Insert 3 Alkaline AA standard batteries.
• Close the battery compartment.
• Connect one end of the line cord to the
telephone line wall socket and the other end
to the backside of the telephone.
The telephone line needs to be
disconnected prior to opening the
battery door!
4
7

Telephone settings

7.1

Set the time and date

When you have a subscription to the caller ID
service and your telephone provider sends the
date and time together with the telephone
number, the phone's clock will be set automatical-
ly. The year must always be set manually !
• Press
• Use / to select "
• Press to enter the settings
• Use / to change
• Press to move to the next digit
• Press to exit the menu
7.2 Set the area code
When you have a subscription to the caller ID
service it can be necessary in some countries to
enter your area code. When the telephone re-
ceives a caller ID it will remove the entered area
code from the incoming number.
• Press to enter the menu
• Use / to select "
• Press to enter the settings
• Use / to change
• Press to move to the next digit.
• Press to exit the menu
7.3 Set the PBX code
When your phone is connected to a PBX system
you can enter the PBX line access code.
The line access code will be added when dialling
out a number from the caller ID list.
When the line code is "0", no digit will be added by
the phone.
• Press to enter the menu
• Use / to select "
• Press to enter the settings
• Use / to change select the digit
• Press to exit the menu
VHW GDWH
"
VHW &2'H
"
S&2GH
"
Topcom Allure 400