Turning Off - Angelo Po 090FT1G Manuel D'utilisation Et D'installation

SWITCHING THE BURNER ON AND OFF
The lighting and turning off procedure is as de-
scribed below for both burners.
Lighting
The first time the griddle is switched on, wash the
plate to remove the protective grease and any dirt,
then switch on the appliance and preheat it for
about 2 hours at the temperature of 195°C.
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1), while keeping button (B) pressed, to
light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Turn the knob (A) anti-clockwise (pos. 2) to the
maximum temperature and leave it there for
about 2 minutes, then turn the knob to the tem-
perature required.
Important
For appliances with chromium-plated and
compound plate, preheating of about 30
min. to the temperature of 190°C is neces-
sary the first time the appliance is switched
on each day.
temperature
Iron plates
Chromium-plated
plates
Compound plates

Turning off

1 - Turn the knob clockwise (pos. 3) to turn the
burner off. The pilot light will remain on to allow
the burner to be re-lit.
2 - Turn the knob clockwise (pos. 4) to turn off the
pilot light.
3 - Turn off the knob to ensure safety.
Minimum Maximum
temperature
(°C) (°C)
130 320
100 280
130 320
1
4
IDM-39614700600.tif
- 9 -
A B
2
3
IT
GB
DE
FR
ES
English