en
Safety instructions
Safety instructions
W Danger of electric shock and fire
The appliance may only be connected to a power supply with
alternating current via a correctly installed socket with earthing.
Ensure that the protective conductor system of the domestic supply
has been correctly installed.
Connect and operate the appliance only according to the type
plate specifications. Do not use if the mains cable or appliance
show any signs of damage. To avoid potential hazards, repairs
such as replacing a damaged cable must only be carried out by
our customer service personnel. Never connect the appliance to
timer switches or remote-controllable sockets. Never leave the
appliance unattended while it is switched on! We recommend that
the appliance is never switched on for longer than is necessary to
process the ingredients.
The mains cable must not come into contact with hot parts or be
pulled across sharp edges. Never immerse the base unit in water or
place it in the dishwasher. Do not steam-clean the appliance. Do not
use the appliance with damp hands and do not operate at no load.
The appliance must always be disconnected from the mains after
each use, whenever the appliance is unattended, prior to assembly,
disassembly or cleaning and in the event of a fault.
W Risk of injury
Immediately after using the appliance wait for it to stop. Before
fitting or replacing attachments, the appliance must be switched off
and disconnected from the mains.
Do not grasp the sharp blades and edges of the shredding and
slicing inserts. Keep hands clear of rotating parts. Never reach into
the feed chute or outlet opening. Never put the food to be processed
into the feed chute with your hands. Only use the pusher provided!
Never clean the sharp blades and edges of the shredding and
slicing inserts with your bare hands.
17