Draining The Cassette Tank - Dometic CT 4050 Notice D'utilisation

Masquer les pouces Voir aussi pour CT 4050:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
Using the toilet
6.5

Draining the cassette tank

Empty the cassette tank when the indicator
➤ Remove the cassette tank (chapter "Removing the cassette tank" on page 22).
➤ Press the release button in the middle of the handle and pull the handle out to its
end position (fig. 9, page 7).
A
NOTICE!
Do not shake the cassette tank vigorously.
Do not hang the cassette tank on a bicycle or other vehicle for trans-
portation.
Do not place heavy objects on the cassette tank during transport.
This can damage the housing and rollers.
➤ Bring the tank to the nearest designated disposal location.
➤ Press the release button in the middle of the handle and push the handle back
into the cassette.
➤ Set the cassette tank upright and rotate the drain pipe 90° upward (fig. 4,
page 4).
I
NOTE
Avoid turning the drain pipe more than 90°, as it otherwise can come
off.
➤ Twist off the cap (fig. 5, page 5).
➤ Hold the cassette tank by the handle with one hand (fig. 0 3, page 7) and
with the other hand on the slider (fig. 0 2, page 7), so that you can push the
vent button (fig. 0 1, page 7) while it is draining.
➤ Press the vent button when the drain pipe points downwards.
✓ The tank drains steadily and without splashing.
➤ After draining, rinse out the cassette tank carefully.
➤ Add a sanitary additive to the cassette (chapter "Adding sanitary additive" on
page 22).
➤ Clear away course dirt from the wheels of the cassette tank to prevent scratching
of the cassette housing.
24
lights up.
CT4000
EN

Publicité

Table des Matières
loading

Table des Matières